Safety information for Axkid ONE 3

  • The car seat may only be installed rear-facing.
  • Always make sure that the harness is adjusted to correctly fit your child’s body. The harness is adjusted by moving the head support.
  • Make sure that the child’s back is pushed against the car seat when restraining your child with the harness.
  • Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked, you should not be able to pinch the straps.
  • Always make sure the support-leg is in its correct position and have contact with the vehicle floor. Check that the indicator on top of the support-leg and the support-leg contact indicator show green.
  • Always make sure the support leg is in its correct position and that is has contact with the vehicle floor. The support leg is a very important safety feature designed to maximise your child’s safety in an accident.

General safety information

Note:
If you have any doubts, contact the retailer where the car seat was purchased or contact info@axkid.com
  • Always follow the instructions in this manual. If in any doubt, contact the retailer for a demonstration of a correct installation.
  • For the latest version of the instruction manual, vist www.axkid.com/manuals.
  • Do not use the car seat in a seating position where an active frontal airbag is fitted. To install the car seat in this location the airbag must be switched off according to the vehicle manufacturer´s instructions.
  • In case of an accident, no matter how small, the car seat should always be replaced. It may have damage that is not visible and could seriously affect the safety of the child. For this reason, Axkid does not recommend purchasing secondhand car seats.
  • If the car seat has been exposed to direct sunlight, make sure the car seat is not too hot before installing the child.
  • Never leave the child unattended in the vehicle.
  • Ensure that any luggage or loose objects are secured in the vehicle as they may cause injuries to passengers in the event of an accident.
  • Ensure that the car seat is installed in a way where no parts become trapped by movable seats, car doors, etc.
  • Make sure there is no twist in the seat belt.
  • Do not attempt to disassemble or modify any part of the car seat. The warranty and the safety performance of the car seat could be affected if doing so.
  • Never use the car seat without the textile cover. The seat textile cover is a safety feature and may only be replaced with an Axkid original seat textile cover.
  • Read the vehicle handbook and the vehicle list at www.axkid.com to find which seating positions are suitable for this car seat.
  • Axkid recommends to always use a seat protection to protect the vehicle seat from scratches and dirt.